Bleeding the brakes and changing the brake fluid [simple and confident]

04. Apr 2022 | Videos EN

0:000:14 Introduction
0:140:43 Brake bleeding unit
0:431:10 Universal adapter
1:111:41 Vehicle-specific adapters
1:422:17 Application of vehicle-specific adapters to Toyota
2:182:50 Application of vehicle-specific adapters to Mercedes
2:513:44 Application of universal adapter
3:454:11 Conclusion

Today, our Workshop-Buddies demonstrate how you can easily bleed the brakes with our practical tools, the filling/bleeding unit and the matching adapters. This is important to be able to refill the brake fluid afterwards. You can also use these tools if you need to change the brake fluid.
The filling/bleeding unit is mobile and does not require a power supply. This means that you are as flexible as possible in its use. Whenever you need to renew parts of the brake hydraulics as for example brake hoses, brake calipers or wheel brake cylinders or you need to change the brake fluid and the hydraulic circuit is opened, our unit is used. As a perfect complement, we offer a comprehensive brand-specific filling adapter set as well as a universal adapter for the brake fluid reservoir. This fits all non-standardized or normed filler supports and is variably adjustable.
The handling of this device is very easy. To be able to bleed the brakes, you must connect the filling hose to the filling/bleeding unit in the first step. Then look for the appropriate adapter for the reservoir and remove the cover of the reservoir on the vehicle. For both adapters, now you have to pull the locking arms of the adapter apart until the adapter fits on the port. Make sure that you push the adapter down as far as it will go and that the locking arms are closed again. With the universal adapter, the correct height can be set using the height adjustment screw. You can fix the brand-specific filling adapters by twisting the cover. At the end, be sure to perform a leak test. In the third step, connect the filling hose of the filling/bleeding unit to the adapter. Now you can easily inflate the reservoir with the pump handle. It is essential to observe the maximum pressure specified in the service manual.
With our filling/bleeding unit and the matching adapters you are well equipped. This makes it possible to refill the brake fluid professionally and easily.

You can find more information about our articles from the video under the following links:

🎬 YouTube
BuddyTalk Brakes from Herth+Buss:
https://youtu.be/yO4-9Q-QG3A

⬇️ Downloads
Catalogue practical workshop tools:
https://herthundbuss.com/en/download/…

📕 Online-Katalog
Filling/Bleeding Unit, brake hydraulics:
https://herthundbuss.com/en/online-ca…
Adapter, container (brake fluid filling):
https://herthundbuss.com/en/online-ca… J9300005
Adapter, container (brake fluid filling):
https://herthundbuss.com/en/online-ca… J9300006

🖥 Website
Microsite Brake:
https://herthundbuss.com/en/brake/

🎶 Spotify
Herth+Buss Playlists:
https://spoti.fi/3djfgF6