The release tool and connector
for every requirement

RELEASE TOOLS

Release tool | Release tool, flat/round plug | Release tool, housing | Release tool set | Tool case

Online-Catalogue

RELEASE TOOLS FOR PROFESSIONALS

In the interior of modern vehicles, everything has become much smaller and more delicate when it comes to the electrical system. In the past, large connections could be opened using unconventional means. However, many special tools are required to perform this function now. We offer you all standard release tools to make releasing contacts and changing contacts child's play. Our three-part set with six blades UnlocBox 4all is particularly popular. It can be used to carry out the most common release work. Our release tools impress with tool tips made from high-quality spring band steel with a tensile strength of approx. 1800 N/mm. This enables workshops to easily remove any contact from the plug housing. Our tools catalogue gives you an overview of the release tools we offer. The corresponding plug housings are also shown, along with the appropriate releasers and the appropriate release principle. This means that there are no more obstacles in the way of precise release work.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Benefit from the real expertise!

Changing contacts made easy - with our release tools

The problem: poor release tool causes damage

The number of uses for special connections is growing every day. In a modern vehicle, the number often amounts to several hundred. The range of plug connector designs is also increasing. Conventional tools can no longer be used for carrying out repair work due to the miniaturisation. But even with special tools there is one important thing to take into account: high quality. If the quality is not right and it is therefore difficult to release contacts, there is a risk that the release tool will not withstand the repair loads. The tool can break, get stuck and make the task of replacing the contacts impossible.

The cause: electrical connections are becoming smaller and the number of connections is increasing

The trend towards miniaturisation in cars is progressing at a rapid pace. It reduces weight, resulting in reduced fuel consumption and a reduction in the strain on the environment. This trend towards miniaturisation also applies to the entire electrical system. Where electrical connections could still be opened a few years ago with conventional tools, a special release tool is now required.

The solution: high-quality release tools

The solution lies in choosing the correct, high-quality release tool. At Herth+Buss, we have a wide variety of extremely various release tools in the Elparts range. These tools help to rule out time-consuming and irritating situations, such as tools bending and breaking off or destroying the plug housing. The reason: the tool tips are made from spring band steel with a tensile strength of approx. 1800 N/mm. In addition to complete release sets in assortment boxes, we also offer a "beginner's set" made up of three release toolswith six blades. They can be used to easily release around 80 percent of all connections.

CONNECTORS

Crimp connector | Contact socket | Contact pin | Cable connector | Cable connector kit | Soldered connector | Crimp connector | Plug distributor

 

CatalogueOnline-Catalogue

MAKING CONTACTS WITH OUR CONNECTORS

The reliability of electrical connections, such as vehicle crimp connectors is very important. Our contact systems meet these high mechanical and electrical requirements. As a supplier of specialist wholesalers and the industry for crimp, soldered and vehicle crimp connectors, a high quality standard that complies with the standards of automotive suppliers is mandatory.

Our online catalogue contains the right pliers and the right release tool for all our connectors. From the squeeze and crimping pliers to the conductor end ferrule pliers, you can find everything you need with us!
Since 1996, we have also been an official KOSTAL distributor and expert for 
KOSTAL Kontakt Systeme parts sales. Our wide product range comprises automotive-compliant connector systems based on innovative, high-performance contacts.

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Please contact us

12 + 7 =

*Required fields

Herth+Buss Fahrzeugteile GmbH & Co. KG
Dieselstraße 2-4
63150 Heusenstamm
Germany

+49 (0)6104-608-0
info@herthundbuss.com