Oct
Parts & Service World – My first deployment after basic training
Today, I’m reporting back on my first trade fair! Parts & Service World, the trade fair for agricultural and garden technology, took place in Kassel from 13-14 October. At the event, everything revolved around agricultural and garden machinery: visitors...
Training for emergencies – High ropes garden in the warehouse
A 2-day training course for a forklift, really? That’s right! After all, the new high-bay forklifts can pick orders at heights of up to 14 metres. In order to practice for an emergency malfunction, a special in-house training session was held last week....
Brake bleeding with the Herth+Buss bleeder unit
Those who want to brake flawlessly ought not to have any air in their brake system. This becomes particularly noticeable when the braking performance decreases, leaving the driver needing to depress the brake pedal with much more force to stop. We’ll show...
“A mords Gaudi!” – The Herth+Buss company party 2018
"Dear colleagues, You are cordially invited to the company party 2018." Hopefully, the invitation alone was enough to make all invitees look forward to this year’s event. This time around, it coincided with the grand opening of the new warehouse building....
DKMS donation drive at Herth+Buss
“Every 15 minutes, somebody in Germany receives the shattering news that they have been diagnosed with blood cancer. Many patients are children and young people whose only chance of recovery is a stem-cell donation. However, one in ten patients does not...
Automechanika 2018 – From planning to finished stand
This year, it all started with a rough idea once again; an idea that consisted of fairly large elements which had been unheard of up until that point. Even our stand builder had to take a deep breath! The idea gradually took shape before eventually...
We want to be closer to workshops! – Our Workshop Advisory Board
On Friday 14 September 2018, the Herth+Buss Workshop Advisory Board convened for the first time at our company headquarters in Heusenstamm. The aim of this long-term project is to help us better understand workshops’ needs. But also to identify problems...
Oct
Parts & Service World – My first deployment after basic training
Today, I’m reporting back on my first trade fair! Parts & Service World, the trade fair for agricultural and garden technology, took place in Kassel from 13-14 October. At the event, everything revolved around agricultural and garden machinery: visitors...
Training for emergencies – High ropes garden in the warehouse
A 2-day training course for a forklift, really? That’s right! After all, the new high-bay forklifts can pick orders at heights of up to 14 metres. In order to practice for an emergency malfunction, a special in-house training session was held last week....
Brake bleeding with the Herth+Buss bleeder unit
Those who want to brake flawlessly ought not to have any air in their brake system. This becomes particularly noticeable when the braking performance decreases, leaving the driver needing to depress the brake pedal with much more force to stop. We’ll show...
“A mords Gaudi!” – The Herth+Buss company party 2018
"Dear colleagues, You are cordially invited to the company party 2018." Hopefully, the invitation alone was enough to make all invitees look forward to this year’s event. This time around, it coincided with the grand opening of the new warehouse building....
DKMS donation drive at Herth+Buss
“Every 15 minutes, somebody in Germany receives the shattering news that they have been diagnosed with blood cancer. Many patients are children and young people whose only chance of recovery is a stem-cell donation. However, one in ten patients does not...
Automechanika 2018 – From planning to finished stand
This year, it all started with a rough idea once again; an idea that consisted of fairly large elements which had been unheard of up until that point. Even our stand builder had to take a deep breath! The idea gradually took shape before eventually...
We want to be closer to workshops! – Our Workshop Advisory Board
On Friday 14 September 2018, the Herth+Buss Workshop Advisory Board convened for the first time at our company headquarters in Heusenstamm. The aim of this long-term project is to help us better understand workshops’ needs. But also to identify problems...